Hem SAQ Forum SAQ Technical Discussions Antenna Conductor Details Svar till: Antenna Conductor Details


Dear Marcus,
The antenna top distribution net is made from 8 pcs 7×2.5mm phosphor bronze wires. The 8 wires are mounted on isolators, hanging down from the top support structure. The sag between each tower is approx. 17m, depending on the temperature.
At each tower, there is a tuning coil, made from litz wire, 1.8m in height and 2.7m in diameter. On tower 1 and 6 the coil is located were the top network is going up/comming down. On tower 2-5 the tuning coil is connected to a near-vertical lead, connected to the top distribution net.



Be the first to know about upcoming SAQ transmissions by subscribing to our newsletter.

No, thanks!