Hem SAQ Forum SAQ Transmissions More about VLF converters

  • Skapare
    Ämne
  • #6908 Svara

    In order to receive the Grimeton SAQ transmissions I am using the Flex-1500 together an active whip antenna and the VLF-LF-MF band up-converter from Heros technology.
    Occasionally I use too my old Trio TS-830S working in parallel with the Flex radio for so the IF output of the VLF converter is derived to the antenna input of booth radios by means of a signal splitter device. The system works fine on all the VLF to MF spectrum covered by the converter.
    73 de M0WWA

    Receiving SAQ

Visar 2 svarstrådar
  • Författare
    Svar
    • #8082 Svara
      Wilfried, DJ1WF
      Gäst

      I am using a homebrew and homebuilt converter, no commercial stuff. In this converter there is a very high impedance amplifier included, so that a short rod antenna around 30cm is enough to pick up SAQ with good SNR. With a 1m rod it becomes much louder 😀

    • #7680 Svara
      Jean-Marie POLARD F5VLB
      Gäst

      I am using several up converters from SV1AFN (look on google). There is one for use with SDR, with a gpsdo entry. Good products !

      I use also earth probe antenna…. https://www.facebook.com/groups/earthprobes/

      Good listening the 30th

    • #7534 Svara
      George I1UP
      Gäst

      I am using DATONG converter with a FT1000MP and using a HF Antenna normally used for trafic on HF bands.

Visar 2 svarstrådar
Svar till: More about VLF converters
Information om dig: