Start SAQ Forum SAQ Transmissions SAQ transmissions on July 1st, 2018

  • Ersteller
    Thema
  • #6368 Reply
    AlexanderSAQAlexanderSAQ
    Keymaster

    Grimeton Radio / SAQ Transmission on July 1st, 2018.

    The annual transmission on “Alexanderson Day” with the Alexanderson alternator on VLF 17.2 kHz with the call SAQ will take place Sunday, July 1st, 2018.
    This year, three transmissions are scheduled as follows:

    1. Startup of tuning at 10:15 (08:15 UTC) with a transmission of a message at 10:45 (08:45 UTC).
    2. Startup of tuning at 12:15 (10:15 UTC) with a transmission of a message at 12:45 (10:45 UTC)
    3. Startup of tuning at 14:15 (12:15 UTC) with a transmission of a message at 14:45 (12:45 UTC)

    All three transmission events will be broadcasted live on our YouTube Channel.

    Amateur Radio Station with the call “SK6SAQ” will be QRV on the following frequencies:
    – 7.035 kHz CW or
    – 14.035 kHz CW or
    – 3.755 kHz SSB

    Two stations will be on the air most of the time.

    QSL-reports to SAQ and SK6SAQ are kindly received via:
    – E-mail to: @alexander.n.se">info@alexander.n.se
    – or via: SM bureau
    – or direct by mail to: Alexander – Grimeton Veteranradios Vaenner,

    Radiostationen
    Grimeton 72
    SE-432 98 GRIMETON
    S W E D E N

    The station will be open to visitors between 10.00 am to 4.00 pm.

    WELCOME!

    World Heritage Grimeton Radio station and The Alexander Association

    For further details, se grimeton.org or alexander.n.se

Ansicht von 24 Antwort-Themen
  • Autor
    Antworten
    • #6893 Reply
      Markus LemkeMark
      Teilnehmer

      Dear guys in Grimeton,

      thank you very much for posting my receiving equipment (telegraph) on your webpage !
      That motivates me to try new, crazy things for SAQ receiving experiments.

      Received your XMAS transmission with good signal and the telegraph was used again
      for writing the CW signs on a strip of paper.

      You made my XMAS

      BR,
      Markus
      DL1DSN

    • #6597 Reply
      Juan Jose de Onate, M0WWA
      Gast

      Interesting to notice the frequency drift around 17.2 kHz while calibrating RPM of the alternator generator.

      Video clip update of the first July 2018 SAQ transmission.

      Interesting to notice the frequency drift around 17.2 kHz while calibrating RPM of the alternator generator.

      Kind Regards,

      Juan, M0WWA

    • #6510 Reply
      Axel61
      Gast

      Hello,

      12:45 UTC:

      Very good Signal in Wittenburg/Germany. Locator JO55MM
      RST: 587

      RX: russian SW-Receiver “P-326″ and
      danisch Marine-Reciver “Sailor 16T”
      VLF-Converter with NE602,
      Antenna: VLF-Loop 110 cm dia and MiniWihp
      Decoder: Software “Fldigi”

      Big thanks to the SAQ team

      73 Axel

    • #6506 Reply
      Gerhard KreuzerGerhard Kreuzer (OE3GKC)
      Gast

      Hi,

      thank you so much to be on air again.
      Locator: JN88bg, 15km NW of Vienna
      Q5, Q5, Q4, 20db, 20db, 10db above noise. My glass-fibre mast collapsed partly before the third Transmission and I didn’t recognice- So the antanna was 13m above ground and later on only 9m.
      Rig: MidiWhip and PC and two different sound Interfaces under test as well as SAQrx and SpectrumLab.

      Thanks a lot, and I am waiting for the Chrtismas Eve Transmission(s) to continue testing.

      73

      Gerhard
      OE3GKC

    • #6502 Reply
      Markus LemkeMark
      Teilnehmer

      Dear Grimeton SAQ Team,

      you made our day at the amateur radio club station DF0SAX near Dresden ! 3 successful transmissions – amazing.
      Several people brought their equipment and we received your signal with 5 different antenna types and several
      receivers. More details may follow. Just for now:
      signal was always well above noise (after we switched off all noise sources around us) and we could receive
      your signal with all used antennas:
      – resonant loop
      – non-resonant loop
      – 26m vertical antenna
      – ferrite rod antenne
      – Mini-whip (electrical field antenna)
      with different receivers.
      One of the highlights was writing down the Morse code with 2 telegraphs which are much older than the transmitter in Grimeton !

      1) German telegraph Gebr. Naglo
      2) German telegraph W. Gurlt telegraph
      both from around 1880 !

      We were able to get the Morse code with ink on the paper clear and readable – no problems ! I will send you the paper strip with the 1st message by mail.
      The only issue came up at the end of the 1st message when your TX was drifting and the signal was going down.
      I think you noticed this also on your side.

      Some impression in the following video (I hope the link works):
      SAQ at DF0SAX – some impressions

    • #6495 Reply
      Yves
      Gast

      Today was my first tentative to receive the Grimeton signal here in Switzerland. I’ve been visiting the radio station a few weeks ago, therefore very interested to listen to the signal once back at home!
      My equipment is a home-brew active E-field antenna based on the design published by DL1DBC (with a TL082 instead of TL07, because that’s what I had in the drawer…) and an Airspy+Spyverter connected to a PC running SDR#

      The QTH was in a large public park right in the middle of the city of Lausanne, JN36HM. By chance the QRM was not as high as I could have expected.

      This RX tentative was for me a “quick and dirty” project. I built the antenna only a few days ago and have not tested it properly. Today I had no time to prepare myself in advance during the “tune” phase, and could only listen for a few minutes to the transmission at 12h45 local swiss summer time (10h45 UTC). I was very surprised to catch a visible CW signal on the waterfall display right at power on! My CW knowledge is not good enough to have decoded the transmission (read “was to fast for me!”). I got only a few letters but I am almost sure that this was the wanted signal. In the VLF band, QRM looks and hear differently than CW.
      I lost the signal after maybe 1-2 minutes. I don’t know how long the transmission duration was planned. Maybe this was simply the end of the transmission.

      I was unfortunately not available for the 2 other transmissions of the day.

      Now that I know my setup is working, I’ll give me a chance to listen to one of the next transmissions in the coming month, from my home QTH in Neuchâtel JN36LX.

      Thanks to all the team for this interesting event.

      Yves / HB9DTX

    • #6493 Reply
      gerard pe1bbi
      Gast

      Dear people

      I did recieve your transmission via sdr.hu (kiwisdr)
      Good reception on PA0RTD and in lisbon and Athenes.
      More surprising was the reception in Qatar with good visible on the screen
      and in audio.Distance to Qatar is 4697 km.
      Strength was S1-S2 Q3
      Tried a lot of other SDR.hu in Japan, USA, Brasil, Bonaire, Canary Islands
      Tasmania but no reception.
      73 Gerard PE1BBI

    • #6471 Reply
      Burkhard
      Gast

      Hi guys,

      nice reception of all 3 transmissions here in JN49BU. My setup for this day:

      Transmision #1: airspy HF+, SDR console V3, MiniWhip (5m above ground), RST 549
      Transmision #2: SDRplay RSP2, SDR console V3, MiniWhip (5m above ground), RST 569
      Transmision #3: SDRplay RSP2, SDRuno, MiniWhip (5m above ground), RST 559

      SNR 5 to 8 db during all transmissions.

      Will there be QSL cards to be sent?

      Thanks and 73,
      Burkhard

    • #6469 Reply
      ALEX DELIGIANNIS SV8QG
      Gast

      The 1st transmission from SAQ on 17,2 KHz was noise free (16 DB above noise) The 3rd transmission at 12:45 UTC the signal was weaker and the noise higher but the audio was readable. thank you for another transmission from thw Old Lady.
      73s Alex SV9QG

    • #6463 Reply
      Bernd SchlieckerBernd
      Teilnehmer

      My first reception from SAQ was on 1 May 2018 on the Baltic Sea. in about 200 km distance to the station. Today I was able to receive SAQ near Berlin (locator JO62TN). The distance was about 510Km. I had to go to a field to have less interference. My receiver is a homemade. This is a direct mixer. Ferrite antenna. The disturbances were strong. But I could hear SAQ well.
      73 55 and good luck.
      Bernd

    • #6461 Reply
      DL2XY
      Gast

      QSL 599 at JO43xu on all 3 Transmissions

      • #6569 Reply
        Bernd SchlieckerBernd
        Gast

        Hallo
        Thank you SAQ Team for the QSL card. I received the card on 28th July. May the station SAQ work for a long time.
        Regards Bernd

    • #6459 Reply
      Wim TonWim Ton
      Teilnehmer

      Very good reception in Switzerland, JN47CL with an active antenna. I had to reduce HF gain to a minimum.

    • #6457 Reply
      Giuliano
      Gast

      Too much noise in city but readable,in JN61EW with Perseus SDR and PA0RDT mini whip antenna.

    • #6456 Reply
      Jaap Last
      Gast

      Hello friends,
      Reception here in the NE of the Netherlands today: 20 dB above noisefloor. Tnx for all the effort and have a nice day there in Grimeton

      ’73 de Jaap PA0T

    • #6451 Reply
      John G4HPW
      Gast

      Received a good signal today both tuning and message.
      Using my Kiwi sdr and datong active antennae in loft space

    • #6449 Reply
      Alexander HahnDH2ID
      Teilnehmer

      SAQ tuning heard here at Kitzbühel 528 now with my SDRIQ
      and the Grahn GS5-SE magnetic active
      antenna and the VLF2 “Alexanderson” module.
      Alex – DH2ID

    • #6446 Reply
      Bill Gruffman
      Gast

      The Alexanderson day transmission at 10:45 clearly heard in Tumba south of Stockholm.

      Again congratulation to your great work gentlemen.
      /Bill

    • #6443 Reply
      Dirk MetzDirk Metz
      Teilnehmer

      Hello,

      i (SWLJO43) heard SAQ today on 17,2 kHz RST 465 here at Asendorf/Germany near Hamburg

      Thanks Dirk

    • #6440 Reply
      Ian HarlingIan Harling G7HFS.
      Gast

      Hi.
      Great transmission this morning.I was using my FT-817nd and Spectrum Communications VLF converter.
      I am at a portable noise free qth near Eastbourne uk.Jo00ds.
      73.
      Ian G7HFS.

    • #6439 Reply
      ColoruColoru
      Teilnehmer

      Hi!
      Nice transmission in JN55XI, light QRM but good signal. Antenna Quad Loop connected via mic input to software HDSDR.
      I’ll wait 2nd TX…
      ’73 de IW3IAB – Andrea

    • #6438 Reply
      Carl, SM4HYG
      Gast

      Hi all, SAQ recieved on active 1m loop at -94dBm in 300 Hz on ELAD DUO in JP70NR. Both tune-up and message without QSB or QRN.
      Thanks for keeping the station going ! Carl / SM4HYG.

    • #6435 Reply
      Alexander HahnDH2ID
      Teilnehmer

      Hello dear friends,

      I heard SAQ today on 17,2 MHz RST 539 here at Kitzbühel/Austria
      My location is at 47°27.43′ N 12°22.38′ E
      My equipment: SDR-IQ by RFspace, Grahn GS-5-SE active antenna
      with the VLF2 “Alexanderson” ferrite module.

      vy 73, Alex – DH2ID

    • #6434 Reply
      Whitham D. Reeve
      Gast

      What is the planned duration of each transmission during the 1 July commemoration?

      The transmission start at 0845, 1045 and 1245 UTC. How long will each one last?

      Thanks!

      Whit

    • #6409 Reply
      Walter, DL6HAK
      Gast

      It exists a newer Version of saqrx

      https://sites.google.com/site/swljo30tb/

      for download: click “FILES” at the end of the page or

      https://sites.google.com/site/swljo30tb/home/files

    • #6407 Reply
      Lars HammarströmLars Hammarström
      Teilnehmer

      One way to Receive the transmission:
      https://sites.google.com/site/sm6lkm/saqrx/

Ansicht von 24 Antwort-Themen
Antwort auf: SAQ transmissions on July 1st, 2018
Deine Information: