That are good news.
Very good news!
We thought that some drop was taking place, we didn’t see anything at all in webSDR Enschede either, but now we should look on our site!
If possible, could you specify the time ranges of the signal flow being considered? This will allow us to better investigate the problems in our operational processes.
Unfortunately nothing was to be seen with long wire 10m directly on low impedance external USB sound card and behind it notebook with w10 and https://www.qsl.net/dl4yhf/spectra1.html. We take the 12kHz and some signals over SAQ point for a working summary around the full above describes “Rx-system”. But may be it were some mistakes.
We’re using the 12 kHz point before and some signals(?) above the SAQ point to verify the functionality of the “Rx system” described above. However, there may be some errors. We’re now quite certain of this and are also looking into our processes. Perhaps the monitoring wasn’t fully staffed, especially on the webSDR.
vy 73
a “only listner” community
QTH Erfurt / DE